Your step length is worked out like this: speed in meters per minute / cadence in steps per minute. At 6:00 per km (166.7 m per minute) and 170 steps per minute, your step is 0.98 m (3.2 ft) and your stride (two steps) 1.96 m. Enter your pace and cadence: the tool gives you your step length, stride length and speed. In "Refine the calculation", you see what a cadence 5 to 10% higher gives at the same speed. To convert your pace, use the pace to speed converter.
How to use it
- Note your average cadence on a run (your watch often shows it in steps per minute), or count your steps for 30 seconds and multiply by two.
- Enter the pace at which you measured that cadence.
- Read your step and stride length: that's the distance you cover with each footstrike.
- Open "Refine the calculation" to see the effect of a higher cadence, or the cadence you would need to go faster.
The method
The calculation rests on an identity: your speed equals your cadence multiplied by your step length. At 5:37 per km, you move 178 meters per minute; at 168 steps per minute, each step is therefore 178 / 168 = 1.06 m. Cadence is counted in steps, both feet together. A full stride, from right foot to right foot, is two steps: 2.12 m here. To go faster, you have to lengthen your step, raise your cadence, or both.
The effect of a higher cadence comes from Heiderscheit and colleagues (2011): they had 45 recreational runners run on a treadmill at a constant speed, at their usual cadence and then higher or lower. With 5% more cadence, the knee absorbed less energy; with 10% more, the knee and the hip. The review by Schubert, Kempf and Heiderscheit (2014), which brings together ten studies, points the same way: at the same speed, a shorter, quicker step reduces several mechanical factors linked to running injuries.
What about 180 steps per minute? The number comes from Jack Daniels, an American coach and physiologist: at the 1984 Olympic Games, he counted the steps of distance runners, and almost all of them were above 180 steps per minute. It was an observation of elite athletes, racing, not a study that sets a target for everyone. Cadence goes up when you speed up, and every runner has their own.
An example
You run at 5:37 per km with a cadence of 168 steps per minute. Your speed is 10.68 km/h, or 178 m per minute, and your step is 178 / 168 = 1.06 m (stride of 2.12 m). At the same speed, +5% cadence gives 176 steps per minute and a 1.01 m step; +10% gives 185 steps per minute and a 0.96 m step. To run at 5:12 per km without lengthening your step, you would need 181 steps per minute. If you are 1.77 m tall, your step is 60% of your height.
Limitations
This calculation describes how you run; it doesn't say whether it's good. No cadence or step length is ideal for everyone, and step length relative to height has no published standard: use it to track yourself over time. Cadence studies measure loads on the joints, not the number of injuries directly: a higher cadence is no guarantee against injury. If you want to change it, do it in small steps, on easy runs. Your watch estimates cadence with its sensors, and the measurement can vary from one model to another. If you feel pain when running, talk to a doctor or a physical therapist rather than betting everything on cadence.
Frequently asked questions
What step length at 6:00 per km and 170 steps per minute?
0.98 m (3.2 ft): 166.7 m per minute / 170. Your stride, two steps, is 1.96 m.
What is a good running cadence?
There isn't just one. Cadence rises with speed and varies from runner to runner. The recreational runners in the Heiderscheit et al. (2011) study ran at about 173 steps per minute on average. Compare yourself mostly to yourself, at the same pace.
Should you run at 180 steps per minute?
No, it's not a rule. The number comes from Jack Daniels' observation of elite runners at the 1984 Olympic Games. If your cadence is low and you take very long steps, going up 5 to 10% at the same speed is a studied benchmark; aiming for 180 at all costs is not.
How do you calculate your stride length?
Divide your speed in meters per minute by your cadence: you get the length of one step. Multiply by two for the full stride. At 12 km/h (200 m per minute) and 180 steps per minute, the step is 1.11 m and the stride 2.22 m.
Step or stride, what's the difference?
A step goes from one foot to the other. A stride (or cycle) goes from one foot back to the same foot, so two steps. Cadence is most often given in steps per minute, both feet together. If your app counts it on one foot only, multiply it by two before entering it.
How do you increase your cadence?
In small steps, at the same pace: aim for about 5% more, on easy runs, with shorter, lighter steps. A metronome, as in the Heiderscheit et al. (2011) study, can help you hold the rhythm.
Sources
- Heiderscheit B.C., Chumanov E.S., Michalski M.P., Wille C.M., Ryan M.B. (2011). Effects of step rate manipulation on joint mechanics during running. Medicine and Science in Sports and Exercise, 43(2), 296-302.
- Schubert A.G., Kempf J., Heiderscheit B.C. (2014). Influence of stride frequency and length on running mechanics: a systematic review. Sports Health, 6(3), 210-217.
- Daniels J. (1998). Daniels' Running Formula. Human Kinetics (observation of cadences at the 1984 Olympic Games).

