This calculator tells you how long a climb will take with your watts: enter your power, your weight, your bike's weight, the average gradient and the length of the climb, and read your time, speed and VAM. It also works the other way: pick a target time and it calculates the power you need. The calculation relies on the physical model of Martin and colleagues (1998), validated on the road with a power meter.
How to use it
- Choose what you want to calculate: your time from your watts, or the watts for a target time.
- Enter your average power (or your target time), your weight, the weight of the bike and gear, the average gradient and the length of the climb.
- Read your climbing time or the power needed, your speed and your VAM.
- Open "Refine the calculation" to choose your position on the bike, add a headwind or the altitude of the climb.
The method
The model of Martin, Milliken, Cobb, McFadden and Coggan (1998) adds up everything your power has to overcome: the gradient (lifting your weight and the bike's), tire rolling resistance, air resistance and wheel bearing friction; the drivetrain loses a small share (97.698% efficiency). On the road, its predictions match measured power with a standard error of 2.7 W. The calculator looks for the speed at which your watts balance all these forces, then derives your time (length / speed) and your VAM, the meters of elevation gained in one hour.
Values taken from the paper: rolling coefficient of 0.0032 and drag area of 0.264 m², the average of their six cyclists measured in a wind tunnel on aero bars. By default, you ride with hands on the tops. For the other positions, the tool applies the differences measured by Grappe and colleagues (1997): compared with hands on the tops, 12.4% less drag in the aero position and 7.8% less with hands in the drops.
The reverse mode works the other way round: your target time gives an average speed (length / time), and the model calculates the power needed to hold it. A headwind is added to your speed when computing air resistance.
Altitude changes air density. The calculator uses the ICAO standard atmosphere (ISO 2533:1975): 1.225 kg/m³ at sea level, about 1.112 at 1,000 m and 1.007 at 2,000 m. Less air to push means a little more speed, especially on gentle gradients, where air resistance matters most.
An example
You weigh 71.8 kg, your bike and gear 8.6 kg, and you hold 231 W on an 11.7 km climb at 6.8%. The model gives 50:54, that is 13.8 km/h on average and a VAM of 936 m/h, for 794 m of climbing. To get up in 44:50, you would need about 266 W, or 3.70 W/kg. With a 15 km/h headwind, your 231 W give 57:44; at an average altitude of 1,500 m, with no wind, 50:36.
Limitations
The model assumes constant power, a steady gradient, a good road and a clean drivetrain. Rolling resistance and drag change from one tire, bike and rider to another, and a rough surface slows you down. Real wind shifts and varies on a switchback climb: treat the headwind as a textbook case. Altitude only acts on the air here: at altitude, your body also produces less power, and the calculator does not account for it. The standard atmosphere is an average: the day's temperature and pressure change air density. If you are returning to sport or have a known heart condition, talk to a doctor before riding all out.
Frequently asked questions
How do I calculate my bike speed from my watts?
You need a model that adds up gradient, rolling resistance and air resistance, like the one by Martin et al. (1998). Enter your power, weight, gradient and length: the calculator finds the speed at which your watts balance these forces.
How many watts to climb a mountain pass in one hour?
It depends on your weight, the gradient and the length. Choose "The watts for a target time", enter 1:00:00 and the climb's data: the calculator gives the power needed and your watts per kilo.
What is VAM?
Average ascent speed (from the Italian velocità ascensionale media): the meters of elevation gained in one hour. It is your speed multiplied by the sine of the slope angle. It lets you compare climbs of different gradients.
Does weight matter more than aerodynamics when climbing?
On a steep gradient, yes: speed is low, air resistance weighs little and most of your watts go into lifting your weight and the bike's. On a gentle gradient or into a headwind, position matters more.
Why do you ride faster at altitude?
The air there is less dense, so it slows you down less. But your body also gets less oxygen and produces less power. The calculator only counts the effect of the air: enter the watts you really hold at altitude.
Sources
- Martin J.C., Milliken D.L., Cobb J.E., McFadden K.L., Coggan A.R. (1998). Validation of a Mathematical Model for Road Cycling Power. Journal of Applied Biomechanics, 14(3), 276-291.
- Grappe F., Candau R., Belli A., Rouillon J.D. (1997). Aerodynamic drag in field cycling with special reference to the Obree's position. Ergonomics, 40(12), 1299-1311.
- ISO 2533:1975. Standard Atmosphere. International Organization for Standardization.
- NOAA, NASA and U.S. Air Force (1976). U.S. Standard Atmosphere, 1976. Washington, D.C.

