Cycling Cadence: How to Find Your Own Rhythm
You see some cyclists spinning fast, others mashing the pedals, and your bike computer shows a number you don't know how to read. Which cadence should you aim for? Four 5-minute blocks are enough to find yours.
The KILYO team
The sports coach that reads your workouts
The short answer
There is no single ideal cadence. A 2007 study published in the Scandinavian Journal of Medicine & Science in Sports measured a gross efficiency of 20-22% at 61 rpm, versus 15-18% at 115 rpm. Test 5-minute blocks between 70 and 100 rpm, at the same effort, and keep the range where you stay smooth.
Key takeaways
- Start with a range of 70 to 100 rpm, then adjust it to the terrain and the length of the ride.
- In Hansen and Sjøgaard, gross efficiency drops as cadence rises from 61 to 115 rpm. In professional cyclists riding at high power, Lucia and his team conclude in their title that low cadences are less efficient.
- To count your cadence without a sensor, count the pedal strokes of one leg for 30 seconds and multiply by two.
- Test one cadence at a time, at the same effort, and note how it feels in your legs and your breathing.
On your bike computer there's a small number people rarely look at: cadence. It tells you how many pedal revolutions you make in one minute. Two cyclists can ride at the same speed with very different cadences, one pushing hard, the other spinning light.
Plenty of sources hand you a number to copy. Here, you start with a range of 70 to 100 rpm and narrow it down with a test of four 5-minute blocks.
What cycling cadence is and how to measure it
A cadence sensor, mounted on the crank or built into the pedals, sends the number to your bike computer or your watch. Without a sensor, you can count by hand:
- Pick one leg, the right one for example.
- Count how many times that leg reaches the bottom over 30 seconds.
- Multiply by two. If you count 40 revolutions, you're pedaling at 80 rpm.
Repeat this count on the flat, on a climb, and near the end of your ride. Your cadence moves more than you think.
What the studies say: spinning fast costs more energy
When you pedal faster, your legs move more, and that movement uses energy. Hansen and Sjøgaard (2007) had subjects pedal between 61 and 115 rpm and measured their gross efficiency.
So should you pedal very slowly? Not really. A 2004 study by Lucia and his team, on professional cyclists riding at high power, concludes in its title that low cadences are less efficient for them. The two studies don't involve the same subjects (tested subjects on one side, professionals riding at high power on the other). No single number fits everyone.
Keep three things separate: the cadence you choose naturally, the cadence that is most economical, and the cadence that suits your ride. That's why your own test matters more than a number you heard somewhere else.
Legs or lungs: where you pay for the effort
Read your sensations this way:
- Low cadence: you push hard on each stroke, and the fatigue is felt mostly in your thighs.
- High cadence: each push is lighter, but there are more of them, and it's mostly your breathing and your heart that work harder.
If your legs burn within the first hour of a three-hour ride, reduce the force on each stroke by spinning a bit faster. If your heart rate climbs quickly while your legs feel fine, slow your cadence down a little.
Your range is the one where you feel smooth: no heavy legs, no breathing that runs away from you, a round pedal stroke rather than a jerky one.
Adjusting your cadence: flat, climb, sprint, triathlon
The studies above don't say which cadence to use on a climb or before a run, so what follows comes from coaching practice.
- On the flat: stay in the range where you feel comfortable, without jerky movements.
- On a climb: your cadence will drop, and that's normal. Shift to an easier gear rather than mashing the pedals. The gear is the combination of the front chainring and the rear cog: the smaller the gear, the lighter each turn feels.
- In a sprint: your cadence rises briefly, then you ease off. It's not a pace to hold.
- In triathlon: before the transition to the run, finish the bike spinning smoothly, with lighter legs. To plan a week that mixes all three disciplines, read beginner triathlon with three workouts a week.
Cadence and knees: one data point, with limits
A publication from the Deutsche Sporthochschule Köln studied the question in cyclists with knee osteoarthritis: a higher cadence and lower power reduced every knee load parameter examined. In another study, a low cadence with high power loaded the knee more in osteoarthritic cyclists.
This is a specific population, so don't apply this result to every cyclist. If your knee hurts when you ride, don't look for the fix only in your cadence. Pain that keeps coming back deserves a medical opinion: talk to a doctor.
What you can do on your next ride: a 3-step test
Pick a flat, quiet route or a home trainer (a stand that holds your bike in place so you can ride indoors), and a moderate effort you know you can hold. To set the right level, use your heart rate zones as a guide.
- Warm up for 15 minutes at an easy pace, letting your natural cadence settle in. Note it: that's your starting point.
- Do four 5-minute blocks at the same effort, changing only the cadence: 70, 80, 90, and 100 rpm. Adjust the gear to keep the same effort, and recover by pedaling easy between blocks. Change the order from one ride to the next (for example 90, 70, 100, 80) so fatigue doesn't skew how you feel.
- Note each block: legs (heavy, neutral, light), breathing (calm, shorter), and smoothness of the stroke.
The block that left your legs light without pushing your breathing up is your range for now. Repeat the test once a month as long as you keep improving.
If you also want to ride at a low cadence, do it on a false flat (a road that barely climbs): a few short blocks, a moderate gear, seated, with real recovery between them.
In KILYO, you can see your bike rides read from your watch or Strava, and follow your heart rate from one ride to the next. The link with your cadence is yours to make with your test notes: the app analyzes your heart rate, pace, volume, and consistency, then adjusts your training plan.
Frequently asked questions
Should you pedal at 90 rpm like the pros?
What cadence should a beginner use?
How do I raise my cadence gradually?
Sources
- Hansen E. A., Sjøgaard G. (2007). Relationship between efficiency and pedal rate in cycling: significance of internal power and muscle fiber type composition. Scandinavian Journal of Medicine & Science in Sports. DOI
- Lucia A., San Juan A. F., Montilla M., Cañete S., Santalla A., Earnest C., Pérez M. (2004). In professional road cyclists, low pedaling cadences are less efficient. Medicine & Science in Sports & Exercise, 36(6), 1048-1054. DOI
- Knee Joint Loading During Cycling: Should Osteoarthritis Patients Pedal with High or Low Cadence? Deutsche Sporthochschule Köln. Publication record
Written with the help of AI.


